# Author: Ultanium # # Start LILO global section # # Faster, but won't work on all systems: #compact # Should work for most systems, and do not have the sector limit: lba32 # If lba32 do not work, use linear: #linear # MBR to install LILO to: boot = /dev/sda map = /boot/.map # If you are having problems booting from a hardware raid-array # or have a unusual setup, try this: #disk=/dev/ataraid/disc0/disc bios=0x80 # see this as the first BIOS disk #disk=/dev/sda bios=0x81 # see this as the second BIOS disk #disk=/dev/hda bios=0x82 # see this as the third BIOS disk # Here you can select the secondary loader to install. A few # examples is: # # boot-text.b # boot-menu.b # boot-bmp.b # install = /boot/boot-menu.b # Note that for lilo-22.5.5 or later you # do not need boot-{text,menu,bmp}.b in # /boot, as they are linked into the lilo # binary. menu-scheme=Wb prompt # If you always want to see the prompt with a 15 second timeout: #timeout=150 delay = 50 # Normal VGA console vga = normal # VESA console with size 1024x768x16: #vga = 791 # # End LILO global section # # # Linux bootable partition config begins # image = /boot/bzImage root = /dev/sda3 #root = /devices/discs/disc0/part3 label = Gentoo read-only # read-only for checking # # Linux bootable partition config ends # # # DOS bootable partition config begins # other = /dev/sda1 #other = /devices/discs/disc0/part1 label = Windows table = /dev/sda # # DOS bootable partition config ends #